Thermally conductive silicone sheet is divided into: ordinary thermally conductive silicone sheet, strong viscous thermally conductive silicone sheet, backed silicone cloth thermally conductive silicone sheet, with glass fiber thermally conductive silicone sheet in the middle. It is specially produced for the design scheme of using the gap to transfer heat, which can fill the gap and complete the heat generation. The heat transfer between the part and the heat dissipation part also plays the role of insulation, shock absorption, sealing, etc., which can meet the design requirements of equipment miniaturization and ultra-thinness. It is manufacturable and usable, and has a wide range of thicknesses. Kind of good thermally conductive filler material.
[Thermal silicone sheet is used in many fields]
1. Used in the LED industry: thermally conductive silicone sheet is used to conduct heat between the aluminum substrate and the heat sink, and between the aluminum substrate and the housing
2. Power supply industry: used for heat conduction between MOS tube, transformer (or capacitor/PFC inductor) and heat sink or shell
3. Communication industry: heat conduction and heat dissipation between motherboard IC and heat sink or shell of mobile communication products, heat conduction and heat dissipation between set-top box DC-DC IC and shell
Fourth, the application of the automotive electronics industry: automotive electronics industry applications (such as xenon lamp ballasts, audio, car series products, etc.) can be used to conduct thermal silica gel
5. Application of PDP/LED TV: heat conduction between power amplifier IC, image IC and heat sink (housing)
6. Home appliance industry: microwave oven/air conditioner (between fan motor power IC and casing)/induction cooker (between thermistor and heat sink)
[Installation steps for the correct use of thermal silica film]
1. Keep the contact surface with the thermal silica gel clean.
2. When removing the thermally conductive silicone sheet, the thermally conductive silicone sheet with a large area should be grabbed from the middle part, and the smaller area is not required for grabbing.
3. Take the sheet in your left hand and tear off one side of the release protective film with your right hand. The protective films on both sides cannot be removed at the same time to reduce the number and area of direct contact with the thermally conductive silicone sheet, and to keep the self-adhesive and thermal conductivity of the thermally conductive silicone sheet from damage.
4. Tear off the side of the protective film, facing the radiator, first align the thermal conductive silicone sheet with the radiator. Put down the thermal silica gel sheet slowly, taking care to avoid air bubbles.
5. Tear off the protective film on the other side and put it into the radiator. The protective film on the back side should be removed with a small force to avoid straining or pulling up the thermal silicone sheet.
6. After tightening or using a strong adhesive thermally conductive silicone sheet, apply a certain pressure to the radiator and store it for a period of time to ensure that the thermally conductive silicone sheet is fixed.
